Invented and Manufactured by Kenneth Glasser Co.
The Adite Diamond ID TEST Tool will scratch or groove any known Diamond substitute, fake, imitation or natural gem look-alike. It will not scratch, groove or damage Diamonds, when used correctly*. "Adite Crystals" are softer than Diamonds (#10 on Moh's scale of hardness) but harder than any other known gemstone material (natural or synthetic). NO scratch or groove will appear on a diamond, whether it is natural or synthetic (synthetic man made diamonds [lab grown] have the same elemental hardness as natural diamonds). Adite is an extremely rare substance (far less of it exists on earth than diamonds) and is rarely seen in sizes over 0.0025ct.
* Through improper use, a person could conceivably cleave
a diamond's edge (but that could be done with an iron implement as well).
The Adite® Diamond ID TEST Tool is clearly the wisest business choice, as well as, the most PRACTICAL and EASIEST to use for these scientific reasons:
- Accuracy (no other diamond tester even comes close)
- Non-Electrical
- Non-Breakable
- Portable (smaller than a pen)
- Works in all conditions (wet, dry, oily or dirty)
- Diamond Hardness is the foundation for the "Adite® Test". Test results are not based on thermal conductivity, electrical conductivity, refractive index, specific gravity, caustic chemical reaction or experienced visual analysis.
- The Adite® Diamond Tester is also the Least Expensive compared to any other type or brand available.
INSTRUCTIONS FOR USE:
Rub the knife edge of the Adite Tool gently
a few times in the same spot on the girdle or on any place of the item
being tested. Then examine that spot under magnification. If there is
no scratch, groove, or abrasion, it is a diamond. Be careful not to
ruin the test object even if it is not a diamond by excessive pressure.
After a little experience you can tell immediately from the feel and
even the sound of the tool on the object whether it is a diamond or
not. If you attempt to scratch a real diamond using more than a few
ounces of pressure over and over again you may damage the crystals of
the Adite Diamond ID TEST Tool. Very little pressure is necessary for the testing
procedure. Also note that excessive pressure could conceivably make a small
cleavage mark (but never a scratch) on a diamond. Although this is extremely
unlikely, one should take care when using the Adite Diamond ID TEST Tool.
This is such an easy test to perform that one should have no pressure or stress during its use.
You will be an expert in determining the difference between diamonds
(cut-and-polished or rough diamonds) and non-diamonds in no time.
Note - Kenneth Glasser Co., it's employees,
agents or distributors accept no liability or responsibility of any
kind or type for the Adite Diamond ID TEST Tool or your business dealings.
We make no guarantees concerning its use, your skill or lack thereof.
You completely agree to use the Adite Diamond Test Tool at your own
risk. It is truly the best, by far the most accurate, the easiest
to use as well as the most portable non-breakable Diamond Test Tool
Available in the World (and the least expensive)!!!
Jewelers Model Set (medium usage)
- Adite® Diamond ID TEST Tool for Cut & Polished Stones (loose or mounted in jewelry)
Has a green handle and utilizes smaller Adite crystals for a thinner more refined groove.
- Adite® Diamond ID TEST Tool for checking Rough (any type of uncut material)
Has a black handle and utilizes larger Adite crystals for a thicker more aggressive groove.
The Jewelers (small pocket) Adite SET = the Cut & Polished and the Diamond Rough ID TEST Tool
--- $110.00 ---
Includes Shipping via US Priority Mail
Pawn Brokers Model Set (heavy usage)
- Adite® Diamond ID TEST Tool for Cut & Polished Stones (loose or mounted in jewelry)
Has a green handle and utilizes smaller Adite crystals for a thinner more refined groove.
- Adite® Diamond ID TEST Tool for checking Rough (any type of uncut material)
Has a black handle and utilizes larger Adite crystals for a thicker more aggressive groove.
The Pawn Brokers (large pocket) Adite SET = the Cut & Polished and the Diamond Rough ID TEST Tool
--- $150.00 ---
Includes Shipping via US Priority Mail
Miners Model (1 unit) (heavy duty, field use)
- Miner's Solo Tool (heavy duty, rocky, dirty usage, pocket size)
Has a blue handle and utilizes the largest Adite crystals for maximum
effect. Designed to be used in the field by prospectors, miners, rock
hounds and anyone who plans on doing aggressive rock testing. The
groove you will make in non-diamond will be more course for easy and
fast recognition.
--- $135.00 ---
Includes Shipping via US Priority Mail
Diamond Color Grading Cards
Produced by Kenneth Glasser Co.
(Super White- 24 pieces - 14 x 10.75cm - 5.5" x 4.25")
-- $30.00 --
Includes Shipping via US Priority Mail
Adite® Dealerships available.
Please call
702-880-9044.
To order please click here.
For Bank Wire Transfer Payments please contact us.
We do not accept credit or debit cards. |